The cable tray price in Karachi is an important consideration for electrical contractors, factory owners, construction companies and industrial procurement teams planning cable management installations. Buyers usually want to know how much a cable tray costs per metre, which sizes are available and whether perforated, ladder or galvanised trays offer better value.
Published Pakistani supplier guides provide a useful starting point. Indicative perforated cable tray prices range from PKR 450 to PKR 2,800 per metre, while ladder trays are advertised between PKR 1,500 and PKR 6,500 per metre in one supplier’s 2026 pricing guide. These are published supplier reference ranges, not guaranteed Karachi market averages or official Ansari Steel rates.
The actual cost depends on width, depth, sheet thickness, material, coating, order quantity and accessories. A 100 mm tray manufactured from thin galvanised sheet cannot be compared directly with a 600 mm heavy-duty industrial tray.
Ansari Steel provides industrial cable tray manufacturing and related fabrication services in Karachi.
This guide explains published 2026 pricing references, size-wise rates, differences between cable tray designs, installation expenses and the information needed to obtain an accurate quotation.
Cable Tray Price in Karachi: 2026 Market Rate Overview
Understanding the cable tray price in Karachi starts with published supplier rates rather than an unexplained single figure.
A Pakistani manufacturer pricing guide lists perforated trays at approximately PKR 450–2,800 per metre and ladder trays at PKR 1,500–6,500 per metre. Another supplier guide advertises narrower ranges for certain products, including wire mesh trays at PKR 600–1,400 per metre.
These differences demonstrate why published rates must be interpreted carefully. Each supplier may be describing different dimensions, thicknesses, finishes or manufacturing specifications.
Indicative Cable Tray Prices in Pakistan
Cable Tray Type | Published Price Range (PKR/metre) | Important Pricing Considerations |
Perforated cable tray | 450–2,800 | Width, sheet thickness, perforation pattern and coating |
Ladder cable tray | 1,500–6,500 | Side rails, rungs, structural requirements and finish |
Wire mesh cable tray | 600–1,400 | Wire diameter, mesh construction, material and dimensions |
Solid-bottom cable tray | 800–1,600 | Sheet thickness, side-wall depth and finish |
Heavy-duty or specialist cable tray | 6,500+ | Larger dimensions, heavier specifications and specialised finishes |
Source context: Published 2026 pricing guides from Cable Trays Manufacturer / Electric Power Engineering. The ranges are drawn from different supplier publications and are not directly comparable. They are not official Ansari Steel quotations. Delivery, accessories, taxes and installation inclusions require confirmation.
These figures should be treated as budgeting references only. Buyers should obtain a current written quotation for the actual required specification.
Cable Tray Size and Price List: Per-Metre Rates
A Cable tray size and price list is particularly useful because tray width and depth have a direct influence on material requirements.
One published June 2026 Pakistani supplier guide provides the following size-based price matrix for perforated trays described as hot-dip galvanised.
Published 2026 Perforated Cable Tray Size-Wise Prices
Tray Width | 50 mm Depth | 75 mm Depth | 100 mm Depth |
50 mm | PKR 850 | PKR 1,050 | PKR 1,250 |
100 mm | PKR 1,150 | PKR 1,400 | PKR 1,650 |
150 mm | PKR 1,450 | PKR 1,750 | PKR 2,050 |
200 mm | PKR 1,850 | PKR 2,200 | PKR 2,600 |
300 mm | PKR 2,650 | PKR 3,150 | PKR 3,750 |
400 mm | PKR 3,650 | PKR 4,350 | PKR 5,150 |
500 mm | PKR 4,850 | PKR 5,750 | PKR 6,800 |
600 mm | PKR 6,250 | PKR 7,400 | PKR 8,750 |
800 mm | PKR 9,250 | PKR 10,800 | PKR 12,500 |
All figures are PKR per metre, reproduced as reference prices from CNC Electric Pakistan’s guide dated 7 June 2026. The source does not establish one uniform thickness for every entry in this table. These figures are not independently verified Karachi transaction prices or Ansari Steel rates.
For example, the published rate for a 100 mm wide and 50 mm deep tray is PKR 1,150 per metre. A 300 mm wide tray with the same 50 mm depth is listed at PKR 2,650 per metre.
That represents a difference of PKR 1,500 per metre within this particular supplier’s price matrix.
For a 50-metre straight run, the corresponding illustrative tray-only calculations would be PKR 57,500 and PKR 132,500 respectively, before any separately charged accessories or installation.
These calculations are not project quotations. The required thickness, coating specification, loading requirements and supplier inclusions must still be confirmed.
The metal fabrication quote guide explains why complete drawings and material details are essential when comparing manufacturing prices.
Factors That Affect Cable Tray Price
Width, Depth and Tray Dimensions
Width is one of the most visible factors affecting cable tray prices.
A wider tray usually requires more sheet metal or structural components, while greater side-wall depth can increase material consumption.
However, buyers should not choose the smallest available tray simply to reduce expenditure. The required dimensions must accommodate the cable arrangement, design allowances, maintenance access and project requirements.
The published price matrix demonstrates how significantly costs can vary across dimensions. Nevertheless, these figures should not replace engineering specifications or a current supplier quotation.
Sheet Gauge and Material Thickness
Material thickness influences the amount of steel required, overall tray weight, rigidity and fabrication cost.
For example, a tray manufactured from 1.2 mm sheet and one manufactured from 2.0 mm sheet may have identical external dimensions but different material requirements.
The thicker product may cost more because of increased metal consumption and manufacturing demands.
Thickness must be selected according to the intended load, span, support spacing and project specification.
Buyers should ask suppliers to state the actual sheet thickness in millimetres rather than relying on an unspecified gauge number.
Material Type and Corrosion Protection
Steel material and surface finish can affect both purchase price and maintenance requirements.
Galvanized cable tray price in Karachi varies according to the underlying steel, coating process, dimensions and quantity.
Pre-galvanised steel, galvanising after fabrication and other protective treatments should not be treated as identical products.
For coastal Karachi locations, outdoor installations and humid industrial environments, corrosion exposure deserves particular attention.
The correct finish should be determined from the actual operating conditions and the project’s technical requirements.
Load Requirements and Accessories
Cable tray loading requirements influence the appropriate construction and support arrangement.
A tray intended for a relatively small cable bundle may require a different specification from one supporting larger industrial cable runs.
Bends, tees, reducers, connectors, covers and support brackets can add to the total project cost.
A supplier quoting straight tray sections alone may appear cheaper than a supplier whose quotation includes a complete accessory package.
Buyers should therefore compare both the tray-only rate and the complete material schedule.
Perforated vs Ladder vs Wire Mesh Tray: Cost Comparison
Perforated Cable Trays
Perforated trays are manufactured from sheet metal containing ventilation or fixing openings.
They provide a supporting surface for cables and are used in various industrial and commercial cable management systems.
Perforated cable tray price in Karachi depends on width, depth, material thickness, perforation pattern, finish and order quantity.
Published Pakistani supplier ranges start at approximately PKR 450 per metre for some light-duty configurations, but larger and more demanding specifications can cost considerably more.
Ladder Cable Trays
Ladder cable trays consist of longitudinal side rails connected by transverse rungs.
Their open construction provides access to cables and may be suitable for particular industrial routes where the design requires this arrangement.
Ladder cable tray price per meter is advertised at approximately PKR 1,500–6,500 in one Pakistani supplier guide.
Side-rail construction, rung spacing, tray width, material thickness and coating requirements influence the actual rate.
Ladder trays should not automatically be considered stronger or more expensive than every perforated tray. Comparisons must use equivalent engineering requirements.
Wire Mesh Cable Trays
Wire mesh trays use interconnected metal wires to form an open cable-support structure.
They may be considered for technical spaces, telecommunications installations and other applications where their construction meets the project design.
Wire mesh cable tray price is advertised at PKR 600–1,400 per metre in one Pakistani supplier guide.
Another 2026 guide lists a 300 mm wire mesh tray at PKR 1,800–3,500 per metre, demonstrating the variation between supplier references.
Wire diameter, tray dimensions, material, coating and accessories must be confirmed before making a meaningful comparison.
Cable Tray Type Comparison
Tray Type | Typical Considerations | Main Price Factors | Price Status |
Perforated | Continuous perforated base, cable support and ventilation | Width, depth, thickness, finish | Published range: PKR 450–2,800/m; specification-dependent |
Ladder | Open rungs, cable access and support design | Side rails, rungs, material and coating | Published range: PKR 1,500–6,500/m; specification-dependent |
Wire mesh | Open mesh, cable routing and mounting arrangements | Wire specification, dimensions and finish | Published ranges differ; quotation required |
Meaningful quotations require matching dimensions, thickness, material, finish, supplied length and included accessories.
Galvanized vs Powder Coated vs Stainless Steel Tray: Price and Durability
Galvanized Cable Trays
Galvanising protects steel through a zinc coating.
It is widely considered for cable management products where the specified coating provides appropriate corrosion protection.
The Galvanized cable tray price in Karachi depends on whether the tray is produced from pre-galvanised material or receives a protective treatment after fabrication.
The coating specification should be clearly identified in the quotation.
Hot Dip Galvanized Cable Trays
Hot-dip galvanising involves applying zinc through immersion in molten zinc under controlled conditions.
Hot dip galvanized cable tray price depends on the tray’s dimensions, base material, fabrication details, coating requirements and quantity.
Although some suppliers publish percentage-based comparisons between finishes, these should not be applied universally without equivalent quotations.
Buyers should confirm the specified coating process and the treatment of joints, cut edges and fittings.
Powder Coated Cable Trays
Powder coating provides a protective and decorative surface finish when applied using an appropriate preparation and coating system.
Powder coated cable tray price Karachi searches often relate to commercial and industrial projects requiring a particular finish or colour.
Pricing depends on surface preparation, coating specification, tray dimensions and order quantity.
Powder coating is not automatically superior to galvanising for corrosion protection. The operating environment and complete coating system determine suitability.
Stainless Steel Trays
Stainless steel trays may be considered for environments requiring particular corrosion-resistance characteristics.
Material grade, thickness, fabrication complexity and surface treatment influence the final cost.
Different stainless steel grades are not interchangeable.
Buyers can explore stainless steel vs mild steel when evaluating material characteristics.
For Karachi’s coastal and industrial conditions, the guide on how to prevent rust on steel provides additional context on protective treatments and maintenance.
Cable Tray Price by Application
Factory and Industrial Installations
Factories often require cable trays for power distribution, machinery connections and control systems.
Pricing depends on cable quantities, routing, support requirements and environmental conditions.
Industrial installations may also require heavy-duty configurations or specialised finishes.
For new industrial developments, related construction expenses such as iron shed price in Karachi may be part of the overall budget, although shed construction rates do not determine cable tray prices.
Commercial Buildings
Commercial developments may require cable trays in service shafts, ceiling voids and electrical distribution areas.
The total cost depends on the route, available installation space, tray dimensions and coordination with other building services.
Contractors can also review steel fabrication for construction when planning associated metalwork.
Solar Projects
Solar projects may require cable containment across rooftops, equipment areas and electrical routes.
Outdoor exposure, mounting arrangements, cable requirements and corrosion protection influence the specification.
The cost of the cable tray should be calculated separately from the wider solar installation.
Data Rooms and Technical Spaces
Data rooms require organised cable routing, access for maintenance and suitable support arrangements.
Wire mesh and other tray configurations may be considered where appropriate to the project’s technical design.
Cable tray price in Pakistan varies across these applications because the required materials, dimensions and installation arrangements are not identical.
Cable Tray Installation Cost in Karachi
Cable tray installation cost Karachi depends on route length, mounting height, site accessibility, support requirements, bends, fittings and labour.
A published per-metre tray price normally should not be assumed to include installation.
For example, using the published PKR 2,650 per metre reference for a 300 mm wide, 50 mm deep tray, the tray-only material calculation for a 100-metre straight run would be:
100 metres × PKR 2,650 = PKR 265,000
This is a mathematical illustration based on a published supplier reference, not a verified quotation for a Karachi project.
The final cost may also include bends, connectors, covers, supports, delivery, lifting equipment and installation labour.
If a contractor quotes a complete installed rate, the buyer should establish exactly which materials and services are included.
The cable tray installation guide provides additional planning guidance.
No universal installation labour rate should be assumed without considering the site and scope.
How to Compare Cable Tray Quotations
Buyers should compare suppliers using the same tray type, dimensions, thickness, finish and total length.
A quotation for 100 metres of perforated tray should not be compared with another quotation unless the specifications are equivalent.
The quotation should state whether prices are per metre, per standard-length piece or for a complete installed system.
It should also identify fittings, supports, coating, delivery and applicable commercial terms.
A useful purchasing comparison separates the cost of straight tray sections from accessories and installation.
This approach helps prevent a seemingly low initial price from becoming a more expensive order after additional components are included.
Custom vs Standard Trays: Ordering, Bulk Rates and Delivery Timeline
Standard tray configurations can simplify purchasing where the required dimensions and finishes are available.
Custom trays may require additional drawings, cutting, bending or fabrication work.
Ansari Steel advertises related fabrication processes, including CNC laser cutting and sheet metal bending.
Its welding services may also be relevant to particular fabricated components or assemblies.
Bulk pricing depends on quantity, material requirements and manufacturing arrangements. A larger order does not automatically guarantee a particular discount.
Delivery timelines depend on material availability, drawing approval, finishing requirements and production scheduling.
Buyers should request a project-specific quotation and confirmed delivery estimate.
How Ansari Steel Supports Cable Tray Manufacturing in Karachi
Ansari Steel advertises industrial cable tray manufacturing, heavy-duty tray solutions, multiple tray sizes and corrosion-resistant options.
Its wider capabilities include CNC works, bending, welding and vector/CAD design.
These processes may be relevant when projects require specified dimensions, fabricated components or drawing-based manufacturing.
The company’s Ansari Steel fabrication services page provides an overview of its advertised capabilities.
Customers should confirm the availability of their exact tray design, material, thickness, finish and required accessories.
The company’s website does not establish a publicly verified per-metre price list for every cable tray configuration, so the supplier-specific rate should be obtained directly.
Request a Cable Tray Quote from Ansari Steel
When approaching a Cable tray manufacturer in Karachi, buyers should provide the complete project specification.
This includes tray type, width, depth, thickness, material, finish, required quantity and accessory details.
Technical drawings or a bill of quantities can make the quotation more accurate.
Customers should also identify the installation environment, delivery location and whether installation services are required.
Ansari Steel can be contacted through its official contact page for project-specific manufacturing enquiries.
Ask for a written breakdown identifying the tray-only rate, included components, coating requirements and delivery arrangements.
Conclusion: Comparing Cable Tray Rates with Confidence
Understanding the cable tray price in Karachi is easier when buyers have published price references alongside the technical factors that influence actual quotations.
Pakistani supplier guides advertise perforated trays from approximately PKR 450 per metre and ladder trays from PKR 1,500 per metre, but these are not universal rates. Wider, deeper, thicker or specially finished trays can cost substantially more.
The published size-wise matrix also demonstrates why dimensions matter. A 100 mm tray and a 600 mm tray cannot be treated as equivalent products simply because both are priced per metre.
Buyers should compare tray type, thickness, material, finish, quantity, accessories and installation scope before making a purchasing decision.
Ansari Steel offers cable tray manufacturing and related metal fabrication services in Karachi. Customers can explore Ansari Steel Karachi and request a quotation based on their actual requirements.
The most reliable purchasing decision combines useful market references with a complete, specification-based supplier quotation.